An Introduction to Assessment Validation: Validating Assessments Explained

An Introduction to Assessment Validation: Validating Assessments Explained

Blog Article

Once RTOs receive registration, they must oversee many aspects such as annual declarations, AVETMISS reporting, and marketing compliance. Of all these duties, validation is frequently the most daunting.

Even though we’ve written about validation several times, let's revisit its definition. ASQA calls validation a quality review of the assessment process.

Validation is essentially about verifying the accuracy of parts of an RTO's assessment process and spotting areas needing improvement. Understanding its key components can make it less daunting.

As per Clause 1.8 of the SRTOs 2015, RTOs are required to ensure that their assessment systems, including RPL, meet training package requirements and are conducted following the Principles of Assessment and Rules of Evidence.

According to the standards, two types of validation must be conducted.

The initial assessment validation ensures your RTO's assessments comply with the training package requirements.

The second type of validation verifies assessments are conducted according to the principles of assessment and rules of evidence.

This means we validate assessments both before and after they are conducted. This article will cover the first type—assessment tool validation.

Exploring the Two Types of Assessment Validation

The Meaning of Assessment Validation

As mentioned earlier and in our earlier blogs, validation is split into two parts: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, sometimes called pre-assessment validation, focuses on ensuring all unit requirements are met, in line with the first part of the clause, ensuring complete workbook compliance.

Conversely, post-assessment validation pertains to the implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.

In this write-up, we will focus on assessment tool validation.

Steps to Perform Assessment Tool Validation

Having discussed the two types of validation, let’s delve into assessment tool validation.

Timing for Conducting Assessment Tool Validation

Assessment tool validation seeks to ensure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

Therefore, whenever you acquire new learning resources, you must conduct assessment tool validation before allowing students to use them.

You don’t have to wait for the next scheduled validation in your 5-year cycle. Validate new resources right away to ensure they are ready for students.

However, this isn't the only time to perform this type of validation. Conduct assessment tool validation also when you:

- your resources get updated
- new training products are added on scope
- reviewing your course against training product updates
- you identify your learning resources as a risk during your risk assessment

ASQA's risk-based approach to regulation necessitates regular risk assessments by RTOs. If there are student complaints about learning resources, it's an opportune time for assessment tool validation.

How to Choose Training Products for Validation

Bear in mind, this validation is meant to ensure all learning resources are compliant before use. All RTOs are required to validate all unit resources.

Resources Needed to Start Assessment Tool Validation

Course Materials

Since you are validating your assessment tools, you will require the entire suite of your learning resources:

Mapping tool – the first document to review. It indicates which assessment items meet unit requirements, aiding in faster validation.

Learner/student workbook – check its suitability for use as an assessment tool. Verify clear instructions and sufficient answer fields. This is often a gap.

Assessor guide/marking guide – also verify if instructions for assessors are sufficient and if clear benchmarks for each assessment item are provided. Clear benchmarks are crucial for reliable assessment outcomes.

Other related resources – these could be checklists, registers, and templates created separately from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.

Assessment Validation Panel

Clause 1.11 details the requirements for validation panel members, noting that validation can be conducted by one or more people. Generally, RTOs require participation from all trainers and assessors and may include industry experts.

As a whole, your validation panel must have:

Vocational competencies and industry skills pertinent to the unit being validated

Up-to-date expertise and skills in vocational teaching and learning

Either of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or its updated version

Validation tool/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists in both the validation process and documentation. It simplifies identifying how each assessment item corresponds to each unit requirement.
At the read more same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
At the same time, it acts as documentation that you have validated your resources before allowing student use.

While ASQA does not have a recommended or required template for assessment tool validation, many templates are available online. These tools generally require validators to review the tools as a whole to see if they meet the principles of assessment.

Principles of Assessment Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.

It is highly advisable to use a more detailed template for evaluating each unit requirement and its corresponding assessment items. Below is an example:

Element Performance Criteria Assessment Directions Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What to Inspect?

As highlighted in our blog post Common Problems In Assessment Tools, it is essential that your assessment tools enable trainers to adhere to assessment principles and evidence rules.

Assessment Key Principles
Fairness – Is equal opportunity and access guaranteed for everyone in the assessment process?

Flexibility – Does the assessment offer various options to demonstrate competence based on different needs and preferences?

Validity – Does the assessment measure what it is supposed to measure? Is it a valid tool for evaluating the required skill or knowledge?

Reliability – Will the assessment give consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?

Key Rules of Evidence

Validity – Does the evidence confirm that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to confirm the learner has the required skills and knowledge?

Authenticity – Does the assessment tool ensure that the work is the candidate’s own?

Currency – Are the assessment tools updated to reflect current units of competency and industry practices?

Although these are often addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.

To prevent using learning resources that do not meet some unit requirements, make sure to follow these guidelines:

Show What You Mean

Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Perform each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication in accordance with service and regulatory requirements:

nappy changing

prepare bottles, bottle feed infants, and clean equipment

prepare solid food and feed infants

respond properly to baby signs and cues

prepare infants for sleep and soothe them

monitor and foster age-appropriate physical exploration and gross motor skills

Having students describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the unit requirement is meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Heed the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby is not sufficient.

Full Compliance or Not Competent

Mind the lists. In the previous example, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Provide More Detail

Each assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s crucial that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What kinds of information can be included in a work package?

The answer might include:

Compulsory resources

Associated expenses

Length of activities

Allocated duties and responsibilities

When an assessment item demands multiple answers, indicate the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.

The same applies to assessment items with double-barrelled questions or those that ask for multiple answers simultaneously. Such questions can confuse both students and assessors, as illustrated in the example below:

Identify a hazard and/or environmental issue in the workplace and select the most effective hazard control hierarchy.

Answers may include, but are not limited to:

Weather conditions – isolation of work area, engineering controls, personal protective equipment

Work area and ground conditions – elimination, isolation, engineering controls

People – isolation, use of engineering controls, administration

Structural hazards – substituting, isolation, engineering

Chemical hazards – isolation, engineering controls, administrative controls

Equipment or machinery – isolating, engineering, administration

Avoiding double-barrelled questions makes it easier for students to answer and for assessors to judge competence accurately.

Given these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” But these guarantees require waiting for an audit before rectifying noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.